DESCRIPTION

TILE GROUT is a blend of specially selected cements,coloured pigments, fillers and polymers. When mixed with water, gives a smooth, easily applied creamy paste for clean grouting of ceramic and vitrified tiles. It is easily applied by steel spatula and does not shrink when dry.

TYPICAL PROPERTIES

Physical Form : Free flowing powder

Fresh wet density : 1.5 kg/litre

Open Time : 60 minutes at 300C

Temperature Resistance :- 20 0C to 80 0C

Compressive Strength : 37 N/mm2@ 28 days

Tensile Strength: 3 N/mm2 @ 28 days

Contact Now

ADVANTAGES

Water resistance

Easy to apply Just add water for a thixotropic grout Ideal for external and internal application

Resistance to cracking in joints up to 3 mm wide Available in a range of attractive colours

Does not shrink when dry

Can be used in submerged conditions

Health & Safety

TILE GROUT is no-toxic and non-flammable. Avoid inhalation of dust during mixing and wear safety glasses, dust mask and gloves. If skin contact occurs wash thoroughly with clean water. Should eye contact occur rinse immediately with plenty of clean water and seek medical advice. Full health and safety data are given in Product Safety Data Sheet.

PACKING & STORAGE

Packing & Coverage

Packing : 1, 5, 10 & 20 kg.

Coverage :Coverage : Approx. 50 running meter of 3mm x 5mm joint/ kg.

Shelf Life & Storage

TILE GROUT has a shelf life of 12 months from dateof manufacture when kept at a temperature between 5 0C to 45 0C and store in the original, unopened bags. All material shall be stored under cover in a manner that will prevent damage preferable on pallets and protected from excessive heat and moisture. Do not freeze.

INSTRUCTION FOR USE

Uses

Kitchens & Bathrooms

Ceramic tiles, vitrified tiles

Swimming pools & shower rooms

Medium & small sized mosaic

Laboratories & shopping mall

Instruction For Use

Surface Preparation : Ensure to maintain 2-3 mm wide joints. All tiles must be securely fixed in place and thoroughly cleaned before TILE GROUT is applied. Tile joint filling should onlybe done 24 hours after fixing the tiles. The extra material can be removed by the use of scraper.

Mixing : Fill gauging water ( 300 - 350 ml per kg) in a clean mixing container. Add TILE GROUT and stir until a lumps free, thick creamy paste is produced, allow to stand for ten minutes prior to use.

Application : Apply TILE GROUT to the spaces between the tiles using a sponge or steel spatula. Re- grout if necessary. Work the mixture into the joints and around the edges and excess grout shall be removed using a moist sponge before drying. Do not use a dry cloth for cleaning as there is risk of discoloration by rubbing dried grout in to the damp joint.

Cleaning : TILE GROUT should be removed from tools,equipment and mixers with clean water immediately after use. Cured material can only be removed mechanically.

IMAGES

Tile Epoxy Grout
Tile Epoxy Grout
Tile Epoxy Grout
Tile Epoxy Grout
Tile Epoxy Grout
Tile Epoxy Grout
Tile Epoxy Grout
Tile Epoxy Grout
Tile Epoxy Grout
Tile Epoxy Grout
Tile Epoxy Grout